Constructions Hobby : How to build a wooden house

How to build a wooden house

 

Constructions Hobby : How to build a wooden house 

Wood is a natural material with the timeless beauty. Easy to shape, versatile when specially treated, resistant to the ravages of time. Even today, in some countries is used for the construction of housing; perhaps have changed the materials, but the guidelines are always the same. In this guide, we see how to build a wooden house for children.

Those of us who, as a child, has not dreamed at least once to have a small house, where we can take refuge and play in peace? Today, this type of game has become fashionable is no accident for sale we can find many models of houses, constructed using different materials. It comes in cardboard, plastic and fabric, but for all those who juggle a bit with the DIY, the greatest satisfaction is definitely the one to build it with his own hands.

Let us see what are the steps to take to achieve it.

To achieve this cabin, the boards to be used more indicated are interlocking: in this way, when you go to build the windows, you will not need to create the frame for support, as a push and two screws on each side will suffice to keep them joined together. Other material: wood screws 6 mm, mounting brackets, 5 square 5 x 5, with relative jigsaw blades wood.

First step will be to find a quiet place where to build the house should not be too secluded, in order to keep an eye on the kids while they play.

Identified the place, we trace the land boundaries for the construction With the help of a pickaxe dig into the ground the sides of a square (the ideal measure could be 1.50 x 1.50) At the four sides of the square of the prepared holes, where they will then planted the support posts of the structure The application hole should be about 50 cm so that, once positioned the mast, be sure and steady throughout the hotel and takes well anchored to the ground Make sure that the poles are well straight, to avoid compromising the building during assembly (to do this, help you with a level) Before planting the supports into the ground, have the foresight to pass a coat of liquid tar in the part that will be placed in the ground, for prevent moisture from ruining Let us now assemble the walls Pinned the axis length of 1.50 to 15 cm in height from pole to pole on the back of the house, so close them to fully realize the windows on the sides, nailed boards whole up to a certain height Cut the remaining depending on the size of the window you want to accomplish other two axes to close them and attach them to the roof.

Before closing the fourth and final wall, we place on the ground floor of the house. For this you can use a sheet of plywood with a thickness of 4-5 cm. If you prefer, you can lie down on a piece of plastic material resistant to moisture. We arrived at the assembly of the roof. Take two strips with a thickness of 4 cm, cut sides to Spizzo and with the help of brackets secure them together. Again with the aid of brackets apply them on the front of the cabin. Repeat the process in the same manner, but this time arrange them in the back. For the covering of the roof matches the front of the house sbordando strips of 5 cm from the structure, nailed to the boards in a vertical leaving overhang length of 15 cm. Completed the construction of the roof we can even think to close the fourth wall, or one where the door will be placed. Place a square of wood about half of the revenue, and with the help of special brackets fasten both the bottom than at the top. With the metro, take the measurement from the quadriletto the support pole, cut the boards to size and inchiodatele.

To complete the closure, can choose whether to create a wooden door or to apply a curtain in cotton. Now the whole structure is finished, nothing remains but to pass one or more coats of protective varnish for wood and let dry.

How to build a shed wooden door

How to build a shed  wooden door

How to build a shed door wooden tools

Building a cabin is very useful to protect the gear and to give an appearance of order and cleanliness in our garden. It 's very simple build it then do not panic. Below I show you some instructions to achieve it with ease and in no time.

Constructed seven panels that will serve: to the floor, four walls and two panels for the tetto.Questi panels are constructed with joists fir 4 cm × 4 which are nailed to the beads by 14 mm or 20. I recommend you use the common beads from attic that can be easily found already 'pronte.L' inner gap between the frame and the beads can 'be used as a venue for laying the insulation.

How to build a shed door wooden tools

First, decide the measures of the wooden house (if the long side of over 3 meters and 'best that the frame is metal). If the side of the floor coincides with or exceeds 3 mt. and 'preferable to divide the same into two panels. For frames, stick to these simple rules: the floor, two of the four walls and pitched roof must be rectangular, while the other two sides must have the shape and the seat so that you can support the roof slopes.

Drill the holes for doors and windows's front and rear frames practiced right and left three through holes that come out on the beads, while, in the frames which form the sides, practiced the same holes in coincidence of the first on the side of the joist always right and left.

These holes serve to unite the frames by means of through bolts At this point impregnated panels of a color of your choice

Lay the panel on the ground floor and see to to level it. If you have opted for a floor with two panels to Provide accoppiarli.Prendete the rear end panel and side panel, add them at an angle by means of bolts through the holes that you have prepared earlier.

How to build a shed door wooden tools

Repeat with the other panels until the closure of the house. Your house and 'mounted. Next fit inside, using nails or screws, the roof panels with the door panel and the rear. nailed or screwed to the walls pavimento.Tagliate by the use of a cutter of the towel bitumen slated 80 mm more 'long roof panel.

Provide then to pierce through the nails short with large head. Started the operation of laying of the cloth always from the most 'low roof. Continue the operation until it covers the entire house. Ultimate work nailing the roof profiles and the profiles at the four corners of the house. The house is ready.

Weaving Hobby : Make a Little House for Dolls

How to make a little house for dolls

 Make a Little House for Dolls

The little house for dolls is a traditional toy, as old as the dolls that girls and Roman blinds already cradling in her arms. A miniature house has something magical for children. And to arouse his charm, the cottage must be accurate in all its details, both inside and with regard to outdoor decoration. The house is characterized by a rather sharp triangular wall, home to the second floor and an overhang of the first floor on the ground floor, supported by corbels. It has the advantage of being picturesque, decorative and easy to build. In this guide, we will see how to build a house for dolls.

Structure. 

This little house for dolls is made with a plywood 9 mm thick (for the external walls, the support and the roof). The bottom and interior partitions are made of plywood 6 mm thick. This realization is, above all, an exercise in tracing cutting the plywood. All the parts that form the house are glued with glue Acetovinylic reinforced with nails round head. The finish of the facade requires the use of pieces of wood to be glued on the front to represent the same support brackets of the boss, the floorboards and window frames. Use small moldings of pine or balsa wood. The glasses are made of Plexiglas and cut with the cutter. Pay close attention to detail, to the chimney, flue are small strips of white wood, cut and pasted, and the staircase, the steps of which are made up of chopsticks with a triangular section, glued on a tablet of plywood. Cutting pattern. Made a path accurately and precisely with a graduated ruler and a pencil. The shaped cuts are made with a jig saw blade from thin. Instead of the jigsaw, you could also use a hacksaw to saw.

Ground floor. 

The partitions are assembled on the bottom and the base using glue and reinforced with nails round head. The chimney flue is simply glued on the bottom with the glue Acetovinylic. Attacked and boarded the partitions on the bottom and on the media. When nailing, be careful not to fessurare the exposed face of the plywood. Planted in the center of the nail edge (it is best to smooth out the tip with a hammer). The first-floor walls are glued and nailed on the floor and on the bottom. Resting on the walls and the ceiling, at the same time, installed the central partition, which supports it. The walls, the partition, the ceiling are nailed and glued in the same way. The walls are nailed from below, under the overhang. The ceiling, nailed on the outside walls and on the bottom, in order to keep the center position the central partition. Roof and stairs. To increase the robustness of the angle of the roof, fit three corner brackets and a ceiling. The scale is formed by a tablet of plywood 4 mm on which will paste the steps. Place the gabled roof on the front wall of the fund, with reinforcing rods to the three triangular corners. The edges of the ceiling must be cut at an angle. For scale, the steps cut from a rod of triangular shape.

Front upper and lower face Glue and nail the pieces on the top of the façade. Cut angled edges before assembling them at the same level on the opposite side The front can be removed to allow you to discover the interior of the house Because of the projection, the upper part must include a part of the walls, floors and roof Assemble these pieces as suggested previously, so that they fit to the opposite part The lower part of the facade is fixed under the overhang Try to center it with precision cut in the bottom to accommodate the uprights The lower part of the facade is glued and nailed on top and reinforced with wooden brackets designed to represent the shelves of overhang Cut them down in order to accommodate the uprights of wood.

Finishes. 

The walls between the windows of the façade are painted white. Leave space for gluing so that the glue will hold. The rods of pine or balsa intended to represent the coating of wood are cut into the right size and glued. Paint the facades and the roof with non-toxic colors. Glue the Plexiglas and paint the squares. Also paint the tiles, the fireplace and the door. Cut and paste the woodwork before decorating the interior.

Weaving Hobby :Create Objects in Timber-Woven

How to create objects in timber-woven

How to create objects in timber-woven

Weaving of simple wood veneers, you can create many different objects. From the booth to the baskets, the boxes, the trays. From the children's room to the kitchen, these creations can decorate your home.

The wood veneers, the thickness of a millimeter, are flexible and practical, as well as easy to weave by hand, without the need to use tools. You can find in any store "do it yourself", or in shops timber. They are found in sheets of 30 cm wide and about 2 feet long.

First derived from your sheet of veneer strips. Select the width according to the objects that you need to perform more subtle texture for a more "dense" or for smaller items, larger for larger objects, such as boxes or booths for children's games. Cut them out with the aid of a hobby knife and a metal line.

Use a wooden floor as the base in a corner Attach two strips, in a manner perpendicular to each other, and lock it with a clamp.

Begin to weave together all the strips, passing them once above and one below the other strips When you have finished braiding, remove the work from the plan.

Trimmed the ends with the large paper scissors, or with a hacksaw for veneers. At this point you can use your mat to create objects. To realize a tray, for example, glue the mat cut to a taper on a panel in masonite. Cut four strips of the length of the edges of the panel and intagliateli so that they can slide and paste in the panel. Create the handles to be able to carry, then smoothed all the edges with sandpaper.

If you want to build a screen, create a frame by screwing and gluing together the strips, leaving them extend down to about 20 inches for the feet. Cut a strip of mat of appropriate size and simply mount it on the frame. Engaged between them the two frames with the hinges.

Another very practical idea is to use the mats to create placemats for American breakfast. Create a frame with the strips of wood and smussatene carefully so that the edges do not risk graffiarvi. Incollatevi the side of the mat below, cutting out any excess.

Weaving Hobby : How to Bind A Lid Wicker

How to Bind A Lid Wicker

How to Bind A Lid Wicker

This guide will teach you how to weave the threads with a wicker cover, which can be used for example to turn a simple basket in a basket, or place it over your fruit bowl because this is always cool and dry. In this case the handle is made with a piece of cork, but will be well also a knob of wood or a simple braided rope.

For the base of the lid, use eight uprights midollino of 60 cm. Open a corner helping you with a punch. Take these 4 pieces putting parallel and 4 others over them, at right angles. League around the cross obtained a weft yarn, pulling it well. Immerse so this part in a basin of water until the uprights will not become flexible. With a knitting needle push the plot towards the center after every round.

After 2 cm of interweaving three-wire, 16 appunti sci uprights wicker of 30 cm. Allargali with an awl. He still works for 2 cm with two strands of rattan, (if you want you can also use one of different colors to create a decoration), continuing to weave with three wires. Now you need to turn up the posts. To do this operation, during the processing with three wires, controls the size of the diameter of the lid, and when this will be wider than the edge of two turns, bends the uprights to the limit of the plot. Curve uprights and piegali right angle upwards.

To weave the edge, cut the three strands of plot and cominciane a new one with two wires each riser passes behind another on his left

Increase with an awl and push the pillar to the outside Tick the peaks of wicker with a pair of scissors Finally you have to make the handle: two pieces of knotted rope and thread the two peaks through the piece of cork Enlarge the plot with the awl and pass him the rope with a crochet hook, tying the two ends inside.

Basket Weaving Hobby

Basket Weaving Hobby

Basket Weaving Hobby

How to change the weft threads in baskets 

The baskets are very ancient art and belongs to several cultures, both Western and Eastern. In this guide I will explain how to change the weft threads while you are weaving an object. In this way, you can either change color to create decorative effects details, or even give greater dynamism to the whole changing material.

Steps:

When you see that the raffia begins to shrink more than the main plot, you have to cut the two tails to 5 inches apart. Provide then wrap a wire around a new mast and lavoralo together to queues that you previously cut. Do not include interweaving the old wires that are located inside of the work. Then changes the color of the weft thread main following the same procedure, but only on the initial upright.

If you want to get another effect, much more particularly, which is to move to weave from two to three weft yarns, add the thread indicated by the letter C in the drawing below to the right of the A and B wires to the initial upright. To do instead the inverse operation, ie switch from three to two strands of straw, dropping one of the wires inside the drum, cut and continue your braiding using two wires.

To change the color instead of the weft thread when you're already changing the wire, you will need to pay more attention because it is not an easy work begins by wrapping the wire around the pole of the new color initial and then rolls up the two colors together

Drop old color later in the basket and fill the newly inserted If during these grafts see that no wires are woven fine, bagnali well with warm water to soften them.