How to build a shed wooden door

How to build a shed  wooden door

How to build a shed door wooden tools

Building a cabin is very useful to protect the gear and to give an appearance of order and cleanliness in our garden. It 's very simple build it then do not panic. Below I show you some instructions to achieve it with ease and in no time.

Constructed seven panels that will serve: to the floor, four walls and two panels for the tetto.Questi panels are constructed with joists fir 4 cm × 4 which are nailed to the beads by 14 mm or 20. I recommend you use the common beads from attic that can be easily found already 'pronte.L' inner gap between the frame and the beads can 'be used as a venue for laying the insulation.

How to build a shed door wooden tools

First, decide the measures of the wooden house (if the long side of over 3 meters and 'best that the frame is metal). If the side of the floor coincides with or exceeds 3 mt. and 'preferable to divide the same into two panels. For frames, stick to these simple rules: the floor, two of the four walls and pitched roof must be rectangular, while the other two sides must have the shape and the seat so that you can support the roof slopes.

Drill the holes for doors and windows's front and rear frames practiced right and left three through holes that come out on the beads, while, in the frames which form the sides, practiced the same holes in coincidence of the first on the side of the joist always right and left.

These holes serve to unite the frames by means of through bolts At this point impregnated panels of a color of your choice

Lay the panel on the ground floor and see to to level it. If you have opted for a floor with two panels to Provide accoppiarli.Prendete the rear end panel and side panel, add them at an angle by means of bolts through the holes that you have prepared earlier.

How to build a shed door wooden tools

Repeat with the other panels until the closure of the house. Your house and 'mounted. Next fit inside, using nails or screws, the roof panels with the door panel and the rear. nailed or screwed to the walls pavimento.Tagliate by the use of a cutter of the towel bitumen slated 80 mm more 'long roof panel.

Provide then to pierce through the nails short with large head. Started the operation of laying of the cloth always from the most 'low roof. Continue the operation until it covers the entire house. Ultimate work nailing the roof profiles and the profiles at the four corners of the house. The house is ready.